Unbeatable Sale View Cart Unbeatable Sale on Facebook Unbeatable Sale on Twitter Bon Cui Comfort Market Fun Toy Mall Greater Medical Halloween Mall Pet Shop USA Purchase in Bulk Techno Outlet Tools Chest Travel Bags Mall Unbeatable Sale Wedding and Party Mall View Cart See All
    Today's Unbeatable Deal!X

Today's Deal of the Day has Sold Out!

Please check back tomorrow to see another Unbeatable Deal!

Close this Window
PreviousHome Electronics Observation & Security Security Locks Hallowell UEL1258-1A-PT Hallowell DigiTech Electronic Locker, 12 in. W x 15 in. D x 78 in. H, 729 Parchment, Single Tier, 1-Wide, Assembled
Hallowell UEL1258-1A-PT Hallowell DigiTech Electronic Locker, 12 in. W x 15 in. D x 78 in. H, 729 Parchment, Single Tier, 1-Wide, Assembled
Send to a Friend       

Hallowell UEL1258-1A-PT Hallowell DigiTech Electronic Locker, 12 in. W x 15 in. D x 78 in. H, 729 Parchment, Single Tier, 1-Wide, Assembled

Bookmark and Share
Item # HLWL4988
$250.52
You Save $87.68 (26%)
Regular Price: $338.20
QTY:
Estimated Shipping Cost:
$149.95


Add item to cart to check stock levels


Hallowell UEL1258-1A-PT Hallowell DigiTech Electronic Locker, 12 in. W x 15 in. D x 78 in. H, 729 Parchment, Single Tier, 1-Wide, Assembled

Item Description
General

Lockers shall Be .in.DigiTech Electronic Access KD Wardrobe and Box Lockers.in. as manufactured by Hallowell or approved equal. Fabricate lockers square, rigid and without warp, with metal faces flat and free from dents or distortion. Make all exposed metal edges safe to touch. Weld frame members together to form rigid, one-piece structure. Weld, bolt, or rivet other joints and connections as standard with manufacturer. Grind exposed welds flush. Do not expose bolts or rivet heads on fronts of locker doors or frames except for fastening of number plates and recessed handle.

Features
  • powered by 2 AA batteries (included) which provide in excess of 10,000 uses
  • LED's flash to indicate low battery level
  • locker can be opened when batteries are low or dead with a mechanical master key override
  • 8-digit master and sub-master codes for two levels of management security
  • Day Use Mode
  • User can lock and unlock door with a user selected code
  • upon returning, the user enters the 4-digit code to unlock door
  • code is then erased and the locker is available for the next user
  • Permanent Use Mode
  • user enters a pre-programmed 4-digit code to unlock and use locker repeatedly
  • lock does not require a code to relock the door
Finishing

All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution to inhibit corrosion, followed by a coat of high grade custom powder electrostatically sprayed and baked at 325 degrees Fahrenheit for a minimum of 30 minutes to provide a tough durable finish.

Color

729 Parchment

Frame

Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on both latch and hinge side vertical members. Rubber bumpers shall be provided to cushion door closing.

Wardrobe Doors

Doors 20.in. high and over to be fabricated from single sheet prime 16 gauge (18 gauge for doors 9.in. wide) with single bends at top and bottom and double bends at the sides. Doors shall be louvered.

Box Doors

Doors 18.in. high and under to be fabricated from single sheet prime 18 gauge with single bends at top, bottom and sides. Doors shall be louvered.

Door Hinges

Hinges for wardrobe and box doors shall not be less than 16 gauge continuous piano type, securely riveted to frame and welded to the door. All doors shall be right hand side hinged.

Body

Fabricate back and sides of 24 gauge (minimum) sheet steel, with double flanged connections extending full height. Form top, bottom and intermediate tier dividers of 24 gauge (minimum) sheet steel with single return bends at all sides. Bolt top and bottom as well as horizontal tier dividers of wardrobe openings to front horizontal frame members at not less than two places in addition to side panels. Form hat shelves at 60 in. and 72 in. high single tier lockers of 24 gauge (minimum) sheet steel with single bends at sides and back and a double bend at front.

Electronic Locks

Each locker door shall include a Hallowell electronic, code access lock. This lock will also serve as the door pull/handle.

Equipment

Furnish each locker with the following items, unless otherwise shown.

Single tier lockers

Openings 60 in. and 72 in. shall include one hat shelf, one double prong ceiling hook and a minimum of two single prong wall hooks.

  • Dimension - 12 W x 15 D x 78 H in.


Model: UEL12581APT


Popular Categories


Recently Viewed Items