Unbeatable Sale View Cart Unbeatable Sale on Facebook Unbeatable Sale on Twitter Bon Cui Comfort Market Fun Toy Mall Greater Medical Halloween Mall Pet Shop USA Purchase in Bulk Techno Outlet Tools Chest Travel Bags Mall Unbeatable Sale Wedding and Party Mall View Cart See All
    Today's Unbeatable Deal!X

Today's Deal of the Day has Sold Out!

Please check back tomorrow to see another Unbeatable Deal!

Close this Window
PreviousHome Electronics Observation & Security Security Locks Hallowell USV1258-1PT Hallowell Safety-View Locker, 12 in. W x 15 in. D x 78 in. H, 729 Parchment, Single Tier, 1-Wide, Knock-Down
Hallowell USV1258-1PT Hallowell Safety-View Locker, 12 in. W x 15 in. D x 78 in. H, 729 Parchment, Single Tier, 1-Wide, Knock-Down
Send to a Friend       

Hallowell USV1258-1PT Hallowell Safety-View Locker, 12 in. W x 15 in. D x 78 in. H, 729 Parchment, Single Tier, 1-Wide, Knock-Down

Bookmark and Share
Item # HLWL5204
You Save $65.80 (26%)
Regular Price: $253.79
Estimated Shipping Cost:

Add item to cart to check stock levels

Hallowell USV1258-1PT Hallowell Safety-View Locker, 12 in. W x 15 in. D x 78 in. H, 729 Parchment, Single Tier, 1-Wide, Knock-Down

Item Description

Fabricate lockers square, rigid and without warp, with metal faces flat and free from dents or distortion. Make all exposed metal edges safe to touch. Weld frame members together to form rigid, one-piece structure. Weld, bolt, or rivet other joints and connections as standard with manufacturer. Grind exposed welds flush. Do not expose bolts or rivet heads on fronts of locker doors or frames except for fastening of number plates and recessed handle.

  • Aluminum number plates (#1-up) with mounting hardware are included.
  • Locks are not included.
  • Safety-View plus doors provide an unobstructed view of locker contents.
  • Can be ordered fully-assembled or knock-down for assembly at destination.
  • Order 3-wide units for best value. Order 1-wide units to complete quantity needed for each continuous row.
  • Color - Parchment.
  • Single Tier.
  • 1-Wide.
  • Knock-Down.
  • Dimensions - 12 W x 15 D x 78 H in.
Wardrobe Locker Features
  • Body Construction - Knock-down, 24 gauge.
  • Body Styles - Single, double and triple tier.
  • Door - 16 gauge steel with two high strength injection molded polycarbonate panels per door for easy content viewing.
  • Hinges - Continuous piano type.
  • Handle - Stainless steel recessed handle with multi-point gravity lift-type latching. Recessed handle protects finish from being marred by padlock.
  • Hooks - One double prong ceiling hook and two single hooks per single and double tier opening. One double ceiling hook for triple tier.
  • Coat Rods - Available for single tier at a nominal cost.
  • Shelves - Hat shelf is included in single tier lockers.
  • Legs - 6 in. high legs are standard. Lockers without legs are available for a nominal charge.
  • Notes - Meets UL flammability standards, Polycarbonate is approved by the Consumer Product Safety Commission (CPSC16CFR 1201).

All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish. Color to be selected from manufacturer's standard list of colors. Interior components to be painted #729 Parchment. Two-Tone Color Combination: Shall be at no additional cost with the locker frame and trim chosen from one color and the doors may be one of any other color chosen from manufacturers standard selection.


Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on both latch and hinge side vertical members. Cross frame members of 16 gauge channel shapes, including intermediate cross frame members on double and triple tier (frames with doors 20 in. high and higher) lockers shall be securely welded to the vertical framing members to ensure rigidity. Rubber bumpers shall be provided to cushion door closing.

Safety-View Wardrobe Doors

Doors 20 in. high and over to be fabricated from single sheet prime 16 gauge (18 gauge for doors 9 Wide) with single bends at top and bottom and double bends at the sides. The channel formed by the double bend at the latch side is designed to fully conceal the lock bar. Doors shall include two clear see-thru polycarbonate panels securely attached to the inner door face located above and below the recessed handle using a full perimeter welded retainer. The see-thru door panels shall consist of a clear, polished surface, ultraviolet-stabilized polycarbonate not less than 3/16 in. thick to meet building code requirements for a CC-1 rating and be listed with the Underwriters Laboratories for the UL flammability standard and the UL972 standard for burglary resistant glazing materials. Polycarbonate must be approved for Consumer Product Safety Commission (CPSC 16CFR 1201) Categories I & II and ANSI Z97.1-1984 Safety Glazing Standards. Doors shall be Plain (non-louvered).

Stainless Steel Recessed Locker Handle

All wardrobe doors shall have a seamless drawn recessed stainless steel handle shaped to receive a padlock or built-in combination lock. The recess pan shall be deep enough to have the lock be flush with the outer door face.

Latch Assembly

The latching mechanism for wardrobe doors shall be finger lift control type constructed of 14 gauge (minimum) steel with a nylon cover that has a generous finger pull. Spring activated nylon slide latches shall be completely enclosed in the lock channel allowing doors to close with the lock in the locked position. Locking devise shall be designed for use with either built-in combination locks or padlocks. Latch hooks shall be securely welded to the vertical frame channel on the strike side to engage the nylon slide latches. Three latch hooks for doors 48 in. and higher, two latch hooks for doors under 48 in. high.

Door Hinges

All doors shall include a 16 gauge continuous piano hinge welded to the door and riveted to the frame. All doors to be right hand, side hinged.


Fabricate back and sides of 24 gauge (minimum) sheet steel, with double flanged connections extending full height. Form top, bottom and intermediate tier dividers of 24 gauge (minimum) sheet steel with single return bends at all sides. Bolt top and bottom as well as horizontal tier dividers of wardrobe openings to front horizontal frame members at not less than one place in addition to side panels. Form hat shelves at 60 in. and 72 in. high single tier lockers of 24 gauge (minimum) sheet steel with single bends at sides and back and a double bend at front.

Locks (If Required)

Shall be master keyed to one system for the entire project. (See lock use chart for suggested lock application).

  • Single Tier Lockers: Openings - 60 in. and 72 in. shall include one hat shelf, one double prong ceiling hook and a minimum of two single prong wall hooks.
  • Double Tier Lockers: Openings - 30 in. and 36 in, high shall include one double prong ceiling hook and a minimum of two single prong wall hooks.
  • Triple Tier Lockers: Openings - 20 in and 24 in. high shall include one double prong ceiling hook only.

Model: USV12581PT

Popular Categories

Recently Viewed Items