Unbeatable Sale View Cart Unbeatable Sale on Facebook Unbeatable Sale on Twitter Bon Cui Comfort Market Fun Toy Mall Greater Medical Halloween Mall Pet Shop USA Purchase in Bulk Techno Outlet Tools Chest Travel Bags Mall Unbeatable Sale Wedding and Party Mall View Cart See All
    Today's Unbeatable Deal!X

Today's Deal of the Day has Sold Out!

Please check back tomorrow to see another Unbeatable Deal!

Close this Window
PreviousHome Housewares Appliance Accessories Accessories Appliance Accessories WGL WG28005 WGL X10 RF Whole House Transceiver Module, 32 Bit Version
WGL WG28005 WGL X10 RF Whole House Transceiver Module, 32 Bit Version
Send to a Friend       

WGL WG28005 WGL X10 RF Whole House Transceiver Module, 32 Bit Version

Bookmark and Share
Item # HMCNT9939
$103.79
You Save $31.13 (23%)
Regular Price: $134.92
QTY:
Estimated Shipping Cost:
$9.95


Add item to cart to check stock levels


WGL WG28005 WGL X10 RF Whole House Transceiver Module, 32 Bit Version

Item Description

The WGL X10 RF Whole House Transceiver Module, 32 Bit Version is a superior alternative to other X10-compatible transceivers. The module receives all 16 house codes of X10 RF, extends operating range for X10 devices, and features additional controls for fine-tuned performance. Because the module receives all 16 house codes, you can replace 16 normal TM751 transceivers with a single module!

In addition to the standard features, it also receives 32 bit RF data from X10 devices like the DS10A and MS10A. These 32 bit security signals are mapped to any regular X10 address and transmitted over the power line. Up to 32 security devices like the DS10A may be mapped to any desired conventional X10 address and transmitted over the power line.

How It Works

The transceiver acts as a bridge for your RF transmitters by relaying X10 commands onto the power line. An internal 310Mhz receiver detects incoming RF signals generated by X10 compatible remote devices: palm pad remotes, key chain remotes, HawkEye motion detectors, and many others. These signals are filtered by an optional user defined list of allowed house and unit codes, preventing interference from any neighbor’s X-10 devices.

The enabled signals are sent to a XTBIIR, TW523, PSC05 or Powerlinc power line interface module which then broadcasts the X10 commands down the power line to receiving modules (X10 light switch modules, lamp modules, appliance modules, etc.).

Contents:
  • Transceiver Module.
  • 12-foot Coax Cable.
  • External Quarter Wave Whip Antenna.
  • Mounting Bracket.
  • RS232 Computer Cable.
Specifications:
  • Weight - 3.3 ounces.
  • Size - 3.8 x 2.4 x 1 inches.
  • Operating Temperature - 20 to 125 degrees F indoor or outdoor (if mounted in weatherproof enclosure).
Electrical
  • Voltage - 7 to 12v DC, 120v AC to 9v DC, 60hz wall mounted supply included.
  • Receiver Frequency - 310mhz.
  • Receiver Range - 200 feet.
  • House/Unit Codes - all 256 addresses.
  • Supported Commands - Basic commands (On, Off, Bright, Dim, All Lights On, All Off).
Connections
  • Power - 3.5 mm plug (center +).
  • Antenna - Male F connector.
  • RS-232 for connection with PC to configure house code/unit code filtering (cable included) - DB9 female DTE pinout TD, RD, SG
  • Power Line Interface (PSC05 or TW523) (cable included) - RJ11.


Model: WG28005


Popular Categories


Recently Viewed Items