Focus Foodservice FFSM1848CH 18 in. x 48 in. hd shelf with mat chromate

Dunnage Shelf offer considerably more weight-bearing capacity than other Focus Shelf. They can be combined with other Focus Shelf to provide extra strength at the lower levels of a shelving unit where the heaviest loads will be placed. The 36 in. length shelf has a 1,600 oz. uniformly distributed static load capacity, the 48 in. shelf holds up to 1,300-pounds , and the 60 in. shelf holds up to 1,000 pounds . Removable wire deck fits over reinforced 1 in. square, tubular frame and lifts off for easy, thorough cleaning.

• Finish - Chromate
• Pack of 1
• Size - 18 in. x 48 in.

• Dunnage Shelf offer considerably more weight-bearing capacity than other Focus Shelf. They can be combined with other Focus Shelf to provide extra strength at the lower levels of a shelving unit where the heaviest loads will be placed. The 36 in. (91.4 cm) length shelf has a 1,600-pound (727 kg) uniformly distributed static load capacity, the 48 in. (121.9 cm) shelf holds up to 1,300-pounds (591 kg), and the 60 in. (152.5 cm) shelf holds up to 1,000 pounds (455 kg).

• The high static-load capacity of these dunnage Shelf translate into an increased ability to stand up under the strain of unbalanced loads and the stress of materials repeatedly being placed on the shelf typical of a commercial food service operation.

• These dunnage Shelf have the same tapered corners and split sleeves that accommodate the 1 in. (25 mm) posts used for other Focus Shelving. They assemble easily, fit securely, and are compatible with same sized Focus wire shelving

• Removable wire deck fits over reinforced 1 in. (25 mm) square, tubular frame. It lifts off for easy, thorough cleaning.

• The front-to-back upper ribs of the deck allow you to slide items on and off the Shelf smoothly.

• Rolled grooves on the posts enable dunnage Shelf to be positioned at desired levels in 1 in. (25 mm) increments.

• Available in chrome-plated and green epoxy coated

• Shelf - The shelf support frame is made of 1 in. (25 mm) square tubing. The removable wire deck is made from 5/16 in. (8.0 mm) diameter wire. Available in chrome-plated and green epoxy coated finishes.
• Posts - Posts have an outside diameter of 1 in. (25 mm) with rolled grooves in 1 in. (25 mm) increments along the entire length. Available in chrome-plated and green epoxy coated finishes.

• Stability decreases as the ratio of height to width increases when heavier loads are placed on the upper Shelf. Keep units as wide and low as possible, using the dunnage shelf as the bottom shelf. If two dunnage Shelf are being used, both should be placed within the lower half of the unit. Dunnage Shelf are not recommended for use in shelf carts or trucks